MOVEMENT SYSTEMS Maximum stability, integrated damping, purist design. tiomos series. Consistent design solutions require a single hinge system that can cover all applications. CURRENTLY THE BEST POSSIBLE MOVEMENT SOLUTION. DISCOVER. TI Enjoy the beauty of movement. grass.eu The systematically expanded Tiomos range extends from movement solutions for thin doors from 6 mm, mirror or aluminium frame doors to variable wide-angle applications, concealed hinges and Tiomos for drinks compartment flaps.
The entire damper system is concealed within the hinge arm. Three levels for individual comfort. In addition to its many special functions, timeless design and unique character, Tiomos offers the highest level of variable operating comfort. The force of the Soft-close damper can be easily adjusted to your individual requirements with a simple turn of the lever. For stronger damping action, turn the adjustment lever 90° to the right. Tiomos hinges leave the factory with the adjustment lever in the horizontal position. For a gentler closing action, simply turn the adjustment lever of the Soft-close damper to the left by 90°. TIOMOS HINGE SYSTEMS A current trend in furniture making is dark, high-quality finishes that continue into the furniture interior. Tiomos series hinges in the Night colour option provide the perfect match for this furniture design aesthetic. Soft-close _inside. Tiomos Night 2
You can tell the quality of a hinge system by how long a hinge will function without developing a fault and how much it will drop under load. Tiomos has achieved exceptionally positive values in tests for durability and for dropping under load. Every function has been completely redesigned and redeveloped from the bottom up. Tiomos offers greater scope for creative design in furniture construction. The hinge system enables full-overlay doors up to 24 mm, ensures a stable connection thanks to the 30% larger contact area, and provides a matching design for combinations of hinges with and without Soft-close. In addition to damping, Tiomos hinges can also be optionally fitted with a self-opening mechanism. Perfect alignment in an instant. The Tiomos hinge system offers three movement dimensions for fine adjustment: Stepless, self-locking depth adjustment by +3 to -2 mm using a worm screw. The height can be adjusted by +/-2 mm. The overlay adjustment is +/-2 mm with limit stop. Another stroke of genius is the new kinematics inside Tiomos. Physically optimised lever movements make furniture doors extremely easy to open. In addition, the unique kinematics enable unprecedented alignments with minimal gap widths. These special features of the new hinge system are particularly beneficial for furniture designers, as the reduced gaps and reveals open up completely new possibilities in furniture design. A masterpiece is usually the sum of small strokes of genius. Tiomos is the best example of this. One of the outstanding characteristics of the hinge system is the Soft-close damper, which features stepwise adjustment and is fully concealed within the hinge arm. The complex inner workings of this high-tech hinge are hidden from view, much like a Swiss clock movement, and are sure to impress with their unique damping characteristics. The closing motion is even and seamless in each movement phase. And all this from an opening angle of just 20°. Irrespective of the size and weight of the door. Tiomos Hinge system 3
TIOMOS HINGE SYSTEMS Tiomos Mirro. Crystal clear. Complete damping comfort for elegant glass and mirror doors. In addition to the clever fastening technology that ensures firm and stable support, Tiomos Mirro is an extremely elegant solution for high-quality mirror and glass doors. The Soft-close damping integrated into the hinge arm of the proven Tiomos hinge generation ensures an elegant, flowing movement when opening and closing high-quality glass and mirror doors, which is barely noticeable and particularly gentle on the fragile material. Tiomos M0. Thin door hinge Strong support for particularly narrow door applications. The Tiomos M0 can be easily screwed onto the furniture door, which allows a wide range of materials with thicknesses from 6 to 10 mm to be used. And all without a cup hole. This means that Tiomos M0 enables the use of thin materials such as aluminium and underlines the aspiration of the Tiomos range to cover all applications. Available with or without integrated Soft-close damping. The Tiomos Mirro glass and mirror door hinge in the Tiomos hinge range is also available in the modern Night colour option, thus elegantly and inconspicuously echoing the trend towards dark materials. 4
5 Full stability for thin furniture doors from 12 mm. In modern furniture construction, surfaces and furniture doors are becoming thinner. But with Tiomos M9, there is no need to compromise on opening and closing comfort. The unique hinge system remains permanently stable in any position, even with a front thickness of just 12 mm. The perfected movement sequences match the trend towards uncompromising furniture design. Rebated doors with stepwise adjustable Soft-close damping. There are furniture doors to meet every taste, so it is ideal when a hinge can be used for many individual solutions. Plus, Tiomos M9 is the only thin door hinge in the world to feature fully integrated, tool-free adjustable damping technology. This enables the use of hinges of the same design with or without a damping function in high-quality furniture construction. High-tech functionality for doors with four-sided mitred application. The 56 components of the complex interior and physically optimised kinematics allow the furniture doors to be opened with great ease up to an opening angle of 110°. These optimised movement sequences enable four-sided mitred applications while also protecting the material. With the Tiomos M series, GRASS offers perfect movement for thin doors, glass and mirror doors as well as rebated doors or doors with mitred application. Available with and without damping or with optional self-opening mechanism. In short, Tiomos meets all the requirements to address the growing demands of modern furniture construction. Tiomos M9 combines all the advantages of the Tiomos hinge series for furniture doors from 12 mm. Tiomos M series One system. Three applications. Tiomos M9 Effortlessly compatible. The self-adhesive adapter for the Tiomos Mirro hinge can be easily mounted on existing self-adhesive adapters from the Nexis series.
HINGE SYSTEMS Discreet technology for modern design. The perfect interaction of two visionary movement systems: the Tiomos Hidden hinge system and the new Kinvaro T-Slim lift-up flap system. The two complement each other in a truly unique way, offering invisible technology that opens up a world of new possibilities for furniture designers. Whether with wood or aluminium frame fronts, Tiomos Hidden and Kinvaro T-Slim combine functional design with timeless understatement. This is what sets them apart. Furniture doors and flap fronts move in harmony. Unobtrusive. Elegant. Solid. Beautiful. Get ready to play "hunt the fitting". Tiomos Hidden and Kinvaro T-Slim make it possible to create innovative, almost completely transparent furniture designs.
GRASS hinge systems offer the perfect movement solution for almost any application. Hinge systems for trade Tiomos The overall aspiration of the range leaves nothing to be desired. Tiomos hinge system for all standard and special applications. Nexis The versatile hinge system. Finely tuned movement systems. Functionality meets high operating comfort. Single-pivot hinges Wide-opening solid metal hinges for individual or continuous cabinet construction. Space-saving. Flexible. Functional. 08 047 81 95 195 211 Tiomos M series The comfortable hinge generation for greater freedom in design. For mirrored doors, glass doors, thin doors and much more. Tiomos Hidden The concealed hinge system for sophisticated furniture design. Available for wood and aluminium frame doors. Flap hinge The functional movement solution integrates beautifully into elegant furniture with drinks compartment flaps. 7
TIOMOS HINGE SYSTEMS The hinge system with a modern design for all standard and special applications. Tiomos Hinge systems 8 Opening angle Product image Product description Full overlay Overlay Half overlay Inset Page 110° Tiomos 110 • Optimal reveal for door thicknesses up to 24 mm • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night 10 120° Tiomos 120 • Optimal reveal for door thicknesses up to 22 mm • Convenient depth adjustment via worm screw 12 155° Tiomos 155 • Optimal reveal for door thicknesses up to 32 mm • For cabinets with inset drawers or pull-out shelves • Surfaces: Nickel or Night 14 95° Tiomos 95 • Optimal reveal for door thicknesses up to 28 mm • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night 16 110° Tiomos 110 AL • Optimal reveal for aluminium frames • Hinge not visible from the outside • Surfaces: Nickel or Night 18 110° Tiomos 110/90A • Hinge for blind corner constructions • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night – – – 20 110° Tiomos 110/90E • Hinge for blind corner constructions • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night – – – 22 110° Tiomos 110/30A • For 30° angled cabinets • Convenient depth adjustment via worm screw – – – 24 110° Tiomos 110/30E • For 30° angled cabinets • Convenient depth adjustment via worm screw – – – 26 110° Tiomos 110/37A • For 37° angled cabinets • Convenient depth adjustment via worm screw – – – 28 110° Tiomos 110/37E • For 37° angled cabinets • Convenient depth adjustment via worm screw – – – 30 110° Tiomos 110/45A • For 45° angled cabinets • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night – – – 32
9 Opening angle Product image Product description Full overlay Overlay Half overlay Inset Page 110° Tiomos 110/45E • For 45° angled cabinets • Convenient depth adjustment via worm screw • Surfaces: Nickel or Night – – – 34 120° Tiomos 120/-15A • For -15° angled cabinets • Convenient depth adjustment via worm screw – – – 36 120° Tiomos 120/-30A • For -30° angled cabinets • Convenient depth adjustment via worm screw – – – 38 120° Tiomos 120/-45A • For -45° angled cabinets • Convenient depth adjustment via worm screw – – – 40 100° Tiomos 100 • For fridge doors (sliding system) • Convenient depth adjustment via worm screw – – – 42 – Tiomos PCC • For connecting two corner cabinet doors • Convenient depth adjustment via worm screw – – – 44 Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic Pin for handle-free opening 88 Assembly technology 225 Assembly aids 230
Packaging units are not covered in this catalogue; please enquire with your supplier. 10 • 110° opening angle • Optimal reveals for door thicknesses up to 24 mm • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in four versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) • With self-opening mechanism 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Cranking Damper Without spring With self-opening mechanism 3 Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Full overlay 1 0 ■ - - - F028138519 F028138523 F017139329 - ■ - - F045138457 F045138461 F034139300 - ■ ■ - F046138579 - F035139357 Overlay 1 3 ■ - - - F028138520 F028138524 F017139330 - ■ - - F045138458 F045138462 F034139301 - ■ ■ - F046138580 F046138584 F035139358 - - - ■ F046140360 – – Half overlay 2 9.5 ■ - - - F028138521 F028138525 F017139331 - ■ - - F045138459 F045138463 F034139302 - ■ ■ - F046138581 F046138585 F035139359 - - - ■ F046140365 – – Inset 2 19 ■ - - - F028138522 F028138526 F017139332 - ■ - - F045138460 F045138464 F034139303 - ■ ■ - F046138582 F046138586 F035139360 - - - ■ F046140366 – – 1 Cup material: steel, nickel-plated/Arm material: steel, nickel-plated 2 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated 3 Additional Tipmatic Plus Pin required ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 3 ■ - - F028139129 - ■ - F045140958 - ■ ■ F046149603 Half overlay 2 9.5 ■ - - F028139130 - ■ - F045140952 - ■ ■ F046149604 Inset 2 19 ■ - - F028139131 - ■ - F045140955 - ■ ■ F046149605 1 Cup material: steel, Night/Arm material: steel, Night 2 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110 110° hinge (door thicknesses up to 24 mm)
All dimensions in millimetres. Subject to changes. 11 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1 K19 84.5 3-7 F 12 24 13 F 84.5 3-7 24 15 10 3-7 84.5 31 2 x F 21.5 F 3.5 31 86 40.5 F 3-7 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 1 Set mounting plate back by door thickness +1.5 mm Door overlay 0 Cup distance 3 4 5 6 7 24.0 -2 23.0 -2 22.0 -2 0 21.0 -2 0 20.0 -2 0 2 19.0 0 2 3 18.5 18.0 0 2 3 17.5 17.0 2 3 16.5 16.0 2 3 15.5 15.0 3 Mounting plate height Door overlay 3 Cup distance 3 4 5 6 7 21.0 -2 20.0 -2 19.0 -2 0 18.0 -2 0 17.0 -2 0 2 16.5 16.0 0 2 3 15.5 15.0 0 2 3 14.5 14.0 2 3 13.5 13.0 2 3 12.5 12.0 3 Mounting plate height Door overlay 9.5 Cup distance 3 4 5 6 7 14.5 -2 13.5 -2 12.5 -2 0 11.5 -2 0 10.5 -2 0 2 10.0 9.5 0 2 3 9.0 8.5 0 2 3 8.0 7.5 2 3 7.0 6.5 2 3 6.0 5.5 3 Mounting plate height Door reveal 19 Cup distance 3 4 5 6 7 0.0 0 2 3 0.5 1.0 0 2 3 1.5 2.0 2 3 3.0 2 3 4.0 3 Mounting plate height MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.22 2.12 22.0 1.0 1.0 1.0 1.0 1.52 21.0 1.0 1.0 1.0 1.0 1.22 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap 2 1.0 with 85° opening angle MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) 85° OPENING ANGLE Door thickness Cup distance 3 4 5 6 7 36.0 11.1 10.3 9.7 9.1 8.5 30.0 5.4 4.8 4.4 4.3 4.2 28.0 3.7 3.6 3.5 3.4 3.3 26.0 2.9 2.8 2.8 2.7 2.6 24.0 2.2 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) 3 at 85° 3 85° opening angle reduction clip NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110
Packaging units are not covered in this catalogue; please enquire with your supplier. 12 • 120° opening angle • Optimal reveals for door thicknesses up to 22 mm • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 120° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Full overlay 1 0 ■ - - F028138547 F028138551 F017139343 - ■ - F045138485 F045138489 F034139314 - ■ ■ F046138607 F046138611 F035139371 Overlay 1 3 ■ - - F028138548 F028138552 F017139344 - ■ - F045138486 F045138490 - - ■ ■ F046138608 F046138612 - Half overlay 2 9.5 ■ - - F028138549 F028138553 F017139345 - ■ - F045138487 F045138491 F034139316 - ■ ■ F046138609 F046138613 F035139373 Inset 2 19 ■ - - F028138550 F028138554 F017139346 - ■ - F045138488 F045138492 F034139317 - ■ ■ F046138610 F046138614 F035139374 1 Cup material: steel, nickel-plated/Arm material: steel, nickel-plated 2 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 120 120° hinge (door thicknesses up to 24 mm)
All dimensions in millimetres. Subject to changes. 13 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1 K19 12.5 13 84.5 3-7 F 24 84.5 3-7 24 F 15.5 10 3.5 22 84.5 31 2 x F F 3-7 86 40.5 F 3-7 31.5 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 1 Set mounting plate back by door thickness +1.5 mm Door overlay 0 Cup distance 3 4 5 6 7 24.0 -2 23.0 -2 22.0 -2 0 21.0 -2 0 20.0 -2 0 2 19.0 0 2 3 18.5 18.0 0 2 3 17.5 17.0 2 3 16.5 16.0 2 3 15.5 15.0 3 Mounting plate height Door overlay 3 Cup distance 3 4 5 6 7 21.0 -2 20.0 -2 19.0 -2 0 18.0 -2 0 17.0 -2 0 2 16.5 16.0 0 2 3 15.5 15.0 0 2 3 14.5 14.0 2 3 13.5 13.0 2 3 12.5 12.0 3 Mounting plate height Door overlay 9.5 Cup distance 3 4 5 6 7 14.5 -2 13.5 -2 12.5 -2 0 11.5 -2 0 10.5 -2 0 2 10.0 9.5 0 2 3 9.0 8.5 0 2 3 8.0 7.5 2 3 7.0 6.5 2 3 6.0 5.5 3 Mounting plate height Door reveal 19 Cup distance 3 4 5 6 7 0.0 0 2 3 0.5 1.0 0 2 3 1.5 2.0 2 3 3.0 2 3 4.0 3 Mounting plate height MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.22 2.12 3.02 3.92 4.72 22.0 1.0 1.12 2.02 2.92 3.82 21.0 1.0 1.0 1.62 2.42 3.32 20.0 1.0 1.0 1.12 2.02 2.92 19.0 1.0 1.0 1.0 1.52 2.42 18.0 1.0 1.0 1.0 1.0 1.92 17.0 1.0 1.0 1.0 1.0 1.52 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap 2 1.0 with 85° opening angle MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 6.4 5.4 4.4 3.4 2.4 22.0 3.0 2.0 1.5 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) 85° OPENING ANGLE Door thickness Cup distance 3 4 5 6 7 36.0 11.1 10.3 9.7 9.1 8.5 30.0 5.4 4.8 4.4 4.3 4.2 28.0 3.7 3.6 3.5 3.4 3.3 26.0 2.9 2.8 2.8 2.7 2.6 24.0 2.2 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) 3 at 85° 3 85° opening angle reduction clip NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 120
Packaging units are not covered in this catalogue; please enquire with your supplier. 14 • 155° opening angle • With convenient depth adjustment via worm screw • For cabinets with inset drawers or pull-out shelves • Optimal reveals for door thicknesses up to 32 mm • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals • Shallow cup depth • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 155° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Full overlay 1 0 ■ - - F028138561 F028138564 F017139350 - ■ - F045138499 F045138502 F034139321 - ■ ■ F046138621 F046138624 - Overlay 1 3 ■ - - F028138562 F028138565 F017139351 - ■ - F045138500 F045138503 F034139322 - ■ ■ F046138622 F046138625 - Half overlay 1 9.5 ■ - - F028138563 F028138566 F017139352 - ■ - F045138501 F045138504 F034139323 - ■ ■ F046138623 F046138626 F035139380 1 Cup material: zamak, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 3 ■ - - F028140944 Half overlay 1 9.5 ■ - - F028140942 1 Cup material: zamak, Night/Arm material: zamak, Night MITRED APPLICATION (ON ALL SIDES) 1 13.6 19 4 19 86 81 37 56 1.5 R R 19 19 With 0 cranking, mounting plate height 19 mm and cup distance 4 mm, door and cabinet edges can meet at mitred angles on all 4 sides. Door thickness (TS) Mitre, all 4 sides Mitre, side R (min.) R (min.) 19-20 1.0 0 22 2.0 0 24 3.0 1.0 26 4.2 2.5 28 5.4 3.8 30 6.5 5.3 ZERO PROTRUSION Nulleinsprung Bei Kröpfung 03 und Montageplatte, Höhe 02, steht bei 90° die Tür korpusbündig! For use with inset drawers. At 0 cranking, and with all mounting plate thicknesses, the door protrudes inwards at 90°. With cranking size 3 and mounting plate height 3 mm, the door will be flush with the cabinet. Tiomos 155 155° wide-angle hinge (door thicknesses up to 32 mm)
All dimensions in millimetres. Subject to changes. 15 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1 K0 3-8 84.5 64 F 3.4 13 84.5 3-8 F 10 67 0.4 84.5 3-8 2x F 6.1 73.5 3.5 F 86 83 3-8 F 6 15.6 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Cranking 0, mounting plate height 21 1 Set mounting plate back by door thickness +1.5 mm Door overlay 0 Cup distance 3 4 5 6 7 8 25.0 -2 24.0 -2 23.0 -2 0 22.0 -2 0 21.0 -2 0 2 20.0 -2 0 2 3 19.0 0 2 3 18.5 18.0 0 2 3 17.5 17.0 2 3 16.5 16.0 2 3 15.5 15.0 3 Mounting plate height Door overlay 3 Cup distance 3 4 5 6 7 8 22.0 -2 21.0 -2 20.0 -2 0 19.0 -2 0 18.0 -2 0 2 17.0 -2 0 2 3 16.5 16.0 0 2 3 15.5 15.0 0 2 3 14.5 14.0 2 3 13.5 13.0 2 3 12.5 12.0 3 Mounting plate height Door overlay 9.5 Cup distance 3 4 5 6 7 8 14.5 -2 13.5 -2 0 12.5 -2 0 11.5 -2 0 2 10.5 -2 0 2 3 10.0 9.5 0 2 3 9.0 8.5 0 2 3 8.0 7.5 2 3 7.0 6.5 2 3 6.0 5.5 3 Mounting plate height Door reveal 0 Cup distance 3 4 5 1.0 19 21 1.5 2.0 21 3.0 21 Mounting plate height MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 8 32.0 1.0 1.0 31.0 1.0 1.0 1.0 30.0 1.0 1.0 1.0 29.0 1.0 1.0 1.0 1.0 1.0 1.0 28.0 1.0 1.0 1.0 1.0 1.0 1.0 26.0 1.0 1.0 1.0 1.0 1.0 1.0 25.0 1.0 1.0 1.0 1.0 1.0 1.0 24.0 1.0 1.0 1.0 1.0 1.0 1.0 22.0 1.0 1.0 1.0 1.0 1.0 1.0 21.0 1.0 1.0 1.0 1.0 1.0 1.0 20.0 1.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 8 32.0 0.20.2 31.0 0.20.20.20.2 30.0 0.20.20.20.20.2 29.0 0.20.20.20.20.20.2 28.0 0.00.00.00.00.00.0 26.0 0.00.00.00.00.00.0 25.0 0.00.00.00.00.00.0 24.0 0.00.00.00.00.00.0 22.0 0.00.00.00.00.00.0 21.0 0.00.00.00.00.00.0 20.0 0.00.00.00.00.00.0 18.0 0.00.00.00.00.00.0 16.0 0.00.00.00.00.00.0 Minimum reveal (F) ■ Only possible with 120° angle reduction clip NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. Up to door thickness 28 mm, no reveals are necessary. For door thicknesses from 29 mm, we recommend a trial fitting. DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 10 3 (8) 39 (40.5) Hinge systems Tiomos 160
Packaging units are not covered in this catalogue; please enquire with your supplier. 16 • 95° opening angle • Optimal reveals for door thicknesses up to 28 mm • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 95° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Full overlay 1 0 ■ - - F028138567 F028138571 F017139353 - ■ - F045138505 F045138509 F034139324 - ■ ■ F046138627 F046138631 F035139381 Overlay 1 3 ■ - - F028138568 F028138572 F017139354 - ■ - F045138506 F045138510 F034139325 - ■ ■ F046138628 F046138632 F035139382 Half overlay 2 9.5 ■ - - F028138569 F028138573 F017139355 - ■ - F045138507 F045138511 F034139326 - ■ ■ - F046138633 - Inset 2 19 ■ - - F028138570 F028138574 F017139356 - ■ - F045138508 F045138512 F034139327 - ■ ■ - F046138634 - 1 Cup material: steel, nickel-plated/Arm material: steel, nickel-plated 2 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 3 ■ - - F028139138 - ■ - F045149534 - ■ ■ F046149609 Half overlay 2 9.5 ■ - - F028140936 - ■ - F045149535 - ■ ■ F046149610 Inset 2 19 ■ - - F028140939 - ■ - F045149536 - ■ ■ F046149611 1 Cup material: steel, Night/Arm material: steel, Night 2 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 95 95° hinge (door thicknesses up to 28 mm)
DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) All dimensions in millimetres. Subject to changes. 17 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1 K19 3-7 F 13 13 24 84.5 F 3-7 10 16 24 84.5 2xF 3.5 3-7 F 22.5 31 84.5 F 3-7 6 32 86 40.5 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 1 Set mounting plate back by door thickness +1.5 mm Door overlay 0 Cup distance 3 4 5 6 7 24.0 -2 23.0 -2 22.0 -2 0 21.0 -2 0 20.0 -2 0 2 19.0 0 2 3 18.5 18.0 0 2 3 17.5 17.0 2 3 16.5 16.0 2 3 15.5 15.0 3 Mounting plate height Door overlay 3 Cup distance 3 4 5 6 7 21.0 -2 20.0 -2 19.0 -2 0 18.0 -2 0 17.0 -2 0 2 16.5 16.0 0 2 3 15.5 15.0 0 2 3 14.5 14.0 2 3 13.5 13.0 2 3 12.5 12.0 3 Mounting plate height Door overlay 9.5 Cup distance 3 4 5 6 7 14.5 -2 13.5 -2 12.5 -2 0 11.5 -2 0 10.5 -2 0 2 10.0 9.5 0 2 3 9.0 8.5 0 2 3 8.0 7.5 2 3 7.0 6.5 2 3 6.0 5.5 3 Mounting plate height Door reveal 19 Cup distance 3 4 5 6 7 0.0 0 2 3 0.5 1.0 0 2 3 1.5 2.0 2 3 3.0 2 3 4.0 3 Mounting plate height MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 36.0 1.0 1.0 1.0 1.4 2.4 30.0 1.0 1.0 1.0 1.0 1.9 28.0 1.0 1.0 1.0 1.0 1.7 26.0 1.0 1.0 1.0 1.0 1.5 24.0 1.0 1.0 1.0 1.0 1.4 22.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 36.0 10.6 9.6 8.6 7.6 6.7 30.0 4.5 3.5 2.5 2.5 1.5 28.0 2.0 1.5 1.5 1.3 1.3 26.0 1.0 1.0 1.0 1.0 1.0 24.0 0.6 0.6 0.6 0.6 0.6 22.0 0.5 0.5 0.5 0.5 0.5 20.0 0.3 0.3 0.3 0.3 0.3 18.0 0.2 0.2 0.2 0.2 0.2 16.0 0.2 0.2 0.2 0.2 0.2 Minimum reveal (F) NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. Hinge systems Tiomos 95
Packaging units are not covered in this catalogue; please enquire with your supplier. 18 • 110° opening angle • Optimal reveal for aluminium frames up to a max. frame thickness of 24 mm and frame width of 22 mm • Hinge not visible from the outside • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION, NICKEL Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Full overlay 1 0 ■ - - F028138154 - ■ - F045138061 - ■ ■ F046138245 Overlay 1 3 ■ - - F028138155 - ■ - F045138062 - ■ ■ F046138246 Half overlay 2 9.5 ■ - - F028138156 - ■ - F045138063 - ■ ■ F046138247 Inset 2 19 ■ - - F028138157 - ■ - F045138064 - ■ ■ F046138248 1 Cup material: zamak, nickel-plated/Arm material: steel, nickel-plated 2 Cup material: zamak, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION, NIGHT Door overlay Product image Cranking Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 3 ■ - - F028140404 - ■ - F045149510 - ■ ■ F046149594 1 Cup material: zamak, Night/Arm material: steel, Night 2 Cup material: zamak, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110 AL 110° aluminium frame hinge (frame thicknesses up to 24 mm)
All dimensions in millimetres. Subject to changes. 19 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Overlay K3 Half overlay K9.5 Inset 1 K19 84.5 19 24 F 12 17 84.5 19 24 14 F 15 19 84.5 F 21.5 7.5 31 40.5 31 F 86 19 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 1 Set mounting plate back by door thickness +1.5 mm Door overlay 0 Cup distance 19.0 0 17.0 2 16.0 3 Mounting plate height Door overlay 3 Cup distance 16.0 0 14.0 2 13.0 3 Mounting plate height Door overlay 9.5 Cup distance 9.5 0 7.5 2 6.5 3 Mounting plate height Door reveal 19 Cup distance 0.0 0 2.0 2 3.0 3 Mounting plate height MINIMUM REVEAL Frame thickness Frame width 18 19 20 21 22 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) INSTALLATION DIMENSIONS Hinge dimensions and reveal calculation with factory setting Fixing screws are not included M 3 x 6 min. 13.5 42+0.2 10.5 +0.1 Ø 3.2 90° 1.3 15 +0.2 min. 16.5 1.3 10.5+0.1 16+0.2 5 ±0.1 15+0.2 28±0.1 max. 22 max. 24 16.5+0.2 Hinge systems Tiomos 110 AL
Tiomos 110/90A.110° blind corner hinge (overlay). Packaging units are not covered in this catalogue; please enquire with your supplier. 20 • Hinge for overlay blind corner constructions • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in two versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Overlay 1 ■ - - F028138535 F028138545 F017139341 - ■ - - F045138483 - 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 ■ - - F028140419 1 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/90A 110° blind corner hinge (overlay)
Hinge systems.Tiomos 110/90A.110° blind corner hinge All dimensions in millimetres. Subject to changes. 21 PLANNING DIMENSIONS All dimensions in millimetres Inset X min.90 X + 47.5 22.5 13 3-7 19 19 X Cross mounting plates with mounting distance 37 Drilling distance (X) Cup distance 3 4 5 6 7 30.0 18 19 20 21 22 29.0 17 18 19 20 21 28.0 16 17 18 19 20 27.0 15 16 17 18 19 26.0 14 15 16 17 18 Door overlay X Linear mounting plates Drilling distance (X) Cup distance 3 4 5 6 7 13.0 18 19 20 21 22 12.0 17 18 19 20 21 11.0 16 17 18 19 20 10.0 15 16 17 18 19 9.0 14 15 16 17 18 Door overlay Mounting plate height 0 MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/90A
Tiomos 110/90E.110° blind corner hinge (inset). Packaging units are not covered in this catalogue; please enquire with your supplier. 22 • Hinge for blind corner constructions • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Inset 1 ■ - - F028138536 F028138546 F017139342 - ■ - F045138474 F045138484 F034139313 - ■ ■ F046138596 F046138606 F035139370 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Inset 1 ■ - - F028140961 1 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/90E 110° blind corner hinge (inset)
All dimensions in millimetres. Subject to changes. 23 PLANNING DIMENSIONS All dimensions in millimetres Inset 31 74.5 min. 90 X 25.5 3-7 F X Cross mounting plates with mounting distance 37 Drilling distance (X) Cup distance 4 5 6 7 28.0 1 0 27.0 2 1 0 26.0 3 2 1 0 Door reveal X Linear mounting plates Drilling distance (X) Cup distance 4 5 6 7 11.0 1 0 10.0 2 1 0 9.0 3 2 1 0 Door reveal Mounting plate height 3 MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. Use standard mounting plate height 3 to ensure that the door and blind corner surface are flush. DRILLING PATTERNS 45/9.5 For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/90E
Packaging units are not covered in this catalogue; please enquire with your supplier. 24 • For 30° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Overlay 1 ■ - - F028138529 - - ■ - F045138467 - - ■ ■ F046138589 F046138599 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/30A +30° angle corner cabinet hinge (overlay)
All dimensions in millimetres. Subject to changes. 25 PLANNING DIMENSIONS All dimensions in millimetres Overlay 4 6.5 17.5 1.5 19 19 X + 47.5 X 5 26 1.5 10.5 19 22 32 19 69.5 0 4 11 19 1.5 3.5 0 65.5 18 35 16 6.6 14 Mounting plate height 0 Mounting plate height 6 Mounting plate height 9 Door overlay Cup distance 3 4 5 6 7 20.5 0 19.5 0 18.5 0 2 17.5 0 2 3 16.5 0 16.0 2 3 15.5 15.0 2 3 14.5 14.0 2 3 13.5 13.0 3 12.5 6 11.5 6 10.5 6 Mounting plate height X Cross mounting plates with mounting distance 37 Mounting plate height 0 2 3 6 X 34.0 33.0 32.0 30.5 Cross mounting plate position (X) X Linear mounting plates Mounting plate height 0 2 3 X 17.0 16.0 15.0 Linear mounting plate position (X) MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. Hinge dimensions and reveal calculation with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/30A
Packaging units are not covered in this catalogue; please enquire with your supplier. 26 • For 30° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Inset 1 ■ - - F028138530 F028138540 - ■ - F045138468 F045138478 - ■ ■ F046138590 F046138600 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/30E +30° corner cabinet hinge (inset)
All dimensions in millimetres. Subject to changes. 27 PLANNING DIMENSIONS All dimensions in millimetres Inset X 52.5 X + 47.5 19 1.3 4 32 19 X Cross mounting plates with mounting distance 37 Door overlay Cup distance 3 4 5 6 7 22 63.5 61.5 21 62.5 20 61.5 60.0 19 61.0 60.0 18 59.0 59.0 17 58.0 16 57.5 56.5 15 57.5 55.5 Cross mounting plate position (X) Mounting plate height 9 Door overlay Cup distance 3 4 5 6 7 22 9.5 12 21 9 20 12 19 8 9 9.5 18 8 9 17 9.5 16 8 9.5 15 6 9 Mounting plate height MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 15.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/30E
Packaging units are not covered in this catalogue; please enquire with your supplier. 28 • For 37° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Overlay 1 ■ - - F028138531 F028138541 - - ■ - F045138469 F045138479 F034139308 - ■ ■ F046138591 F046138601 F035139365 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/37A +37° angle corner cabinet hinge (overlay)
All dimensions in millimetres. Subject to changes. 29 PLANNING DIMENSIONS All dimensions in millimetres Overlay 19 26 19 X + 47.5 X 1.5 8.5 4 19 2.5 1.2 19 19 38 72 24.5 7 17 1.5 19 72 24.5 5 0.2 38 16 1.5 15.5 Mounting plate height 0 Mounting plate height 12 Mounting plate height 12 Door overlay Cup distance 3 4 5 6 7 21.5 0 21.0 0 20.0 0 19.0 0 18.5 2 18.0 0 3 17.5 2 17.0 3 16.5 2 16.0 3 15.5 2 15.0 3 14.5 6 14.0 3 13.0 6 12.0 6 11.0 6 10.0 6 Mounting plate height X Cross mounting plates with mounting distance 37 Mounting plate height 0 2 3 6 X 33.5 32.0 31.0 29.0 Cross mounting plate position (X) X Linear mounting plates Mounting plate height 0 2 3 X 16.5 15.0 14.0 Linear mounting plate position (X) MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/37A
Packaging units are not covered in this catalogue; please enquire with your supplier. 30 • For 37° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Inset 1 ■ - - F028138532 F028138542 - - ■ - - F045138480 F034139309 - ■ ■ F046138592 F046138602 F035139366 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/37E +37° corner cabinet hinge (inset)
Hinge systems.Tiomos 110/37E.+37° corner cabinet hinge All dimensions in millimetres. Subject to changes. 31 PLANNING DIMENSIONS All dimensions in millimetres Inset 19 5.5 1.3 19 X X + 47.5 55.5 33 X Cross mounting plates with mounting distance 37 Door overlay Cup distance 3 4 5 6 7 22 59.0 57.5 56.5 21 57.5 56.5 20 56.5 55.0 19 55.0 18 56.0 17 54.5 53.0 16 54.5 54.0 53.0 15 53.0 52.5 Cross mounting plate position (X) Mounting plate height 12 Door overlay Cup distance 3 4 5 6 7 22 12 14 15 21 12 14 20 12 14 19 12 18 9 17 9.5 12 16 8 9 9.5 15 8 9 Mounting plate height MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 15.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/37E
Packaging units are not covered in this catalogue; please enquire with your supplier. 32 • For 45° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Overlay 1 ■ - - F028138533 F028138543 F017139339 - ■ - F045138471 - F034139310 - ■ ■ F046138593 - F035139367 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 ■ - - F028140962 1 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/45A +45° angle corner cabinet hinge (overlay)
All dimensions in millimetres. Subject to changes. 33 PLANNING DIMENSIONS All dimensions in millimetres Overlay 19 X + 47.5 28 X 4 16.5 7 2.5 11.5 36 19 69.5 22 0 5.5 6.6 19 1.5 19 1.5 6.5 2 16 40 65.5 18 16.5 0 Mounting plate height 0 Mounting plate height 8 Mounting plate height 12 Door overlay Cup distance 3 4 5 6 7 19.5 0 19.0 18.5 0 18.0 17.5 0 17.0 16.5 0 2 16.0 15.5 0 2 15.0 3 14.5 2 14.0 3 13.5 2 13.0 3 12.5 2 12.0 3 11.0 3 6 10.0 6 Mounting plate height X Cross mounting plates with mounting distance 37 Mounting plate height 0 2 3 6 X 30.5 28.5 27.5 24.5 Cross mounting plate position (X) X Linear mounting plates Mounting plate height 0 2 3 X 13.5 11.5 10.5 Linear mounting plate position (X) MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/45A
Packaging units are not covered in this catalogue; please enquire with your supplier. 34 • For 45° angled cabinets • 110° opening angle • With convenient depth adjustment via worm screw • 3-dimensional adjustment with corresponding mounting plate • Minimum reveals • Surfaces: Nickel or Night (especially for dark cabinet materials and woods) Available in three versions: • With integrated damper (3 adjustable damping levels) • Without integrated damper • Without self-closing mechanism (without spring) 110° ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NICKEL Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Click-on for press fitting Impresso tool-free Inset 1 ■ - - F028138534 F028138544 F017139340 - ■ - F045138472 F045138482 - - ■ ■ - F046138604 F035139368 1 Cup material: steel, nickel-plated/Arm material: zamak, nickel-plated ORDER INFORMATION FOR DRILLING PATTERN 45/9.5, NIGHT Door overlay Product image Damper Without spring Art. No. With Without Click-on for screw fitting Overlay 1 ■ - - F028140418 1 Cup material: steel, Night/Arm material: zamak, Night PAGE REFERENCES Tiomos mounting plates 60 Accessories 70 Technical information 74 Tipmatic 88 Assembly technology 225 Assembly aids 230 Tiomos 110/45E +45° corner cabinet hinge (inset)
www.grass.euRkJQdWJsaXNoZXIy ODM0MzI=