All dimensions in millimetres. Subject to changes. 121 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Half overlay K8 Inset K0 Mitred application K0 2 max. 26 3.5 55 70 3-8 F 11 max. 26 3-8 2xF 10 4.5 3 F 63 70 18 12.5 71 71 19 3-8 F 6 71 71 19 120° 37 19 3 Mounting plate height 2 Mounting plate height 2 Inset application Mitred application Door overlay 0 Cup distance 3 4 5 6 7 8 21 0 20 0 19 0 2 18 0 2 3 17 0 2 3 4 16 0 2 3 4 15 2 3 4 14 2 3 4 13 3 4 12 4 Mounting plate height Door overlay 8 Cup distance 3 4 5 6 7 8 13 0 12 0 11 0 2 10 0 2 3 9 0 2 3 4 8 0 2 3 4 7 2 3 4 6 2 3 4 5 3 4 Mounting plate height With cranking 0, cup distance 3 mm and mounting plate height 18, you can achieve an inset application. Use 120° opening angle reduction clip. With cranking 0, cup distance 3 mm and a mounting plate height 18, you can achieve a mitred application. Use 120° opening angle reduction clip. ZERO PROTRUSION Zero protrusion for use with inset drawers. With cranking 0 and mounting plate height 0, the door is flush with the cabinet at 90°. MINIMUM GAP Door thickness Cup distance 3 4 5 6 8 10 16 0.0 0.0 0.0 0.0 0.0 0.0 18 0.0 0.0 0.0 0.0 0.0 0.0 19 0.0 0.0 0.0 0.0 0.0 0.0 20 0.0 0.0 0.0 0.0 0.0 0.0 22 0.0 0.0 0.0 0.0 0.0 0.0 23 0.0 0.0 0.0 0.0 0.0 0.0 24 0.0 0.0 0.0 0.0 0.0 0.0 25 0.0 0.0 0.0 0.0 0.0 0.0 26 0.0 0.0 0.0 0.0 0.0 0.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 8 16 0.0 0.0 0.0 0.0 0.0 0.0 18 0.0 0.0 0.0 0.0 0.0 0.0 19 0.0 0.0 0.0 0.0 0.0 0.0 20 0.0 0.0 0.0 0.0 0.0 0.0 22 0.0 0.0 0.0 0.0 0.0 0.0 23 0.0 0.0 0.0 0.0 0.0 0.0 24 0.0 0.0 0.0 0.5 1.8 2.0 25 6.5 6.5 6.0 5.5 4.8 4.0 26 10.5 9.5 8.5 7.5 6.5 5.5 Minimum reveal (F) NOTES The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Important: Reveals were determined with a (door) edge radius of 1 mm. Hinge dimensions and reveal calculation with factory setting. We recommend a trial fitting. DRILLING PATTERNS For screw fitting For press fitting CUP DIMENSIONS Hinge systems.Nexis Click-on 65.170° wide-angle hinge Hinge systems Nexis Click-on 65
RkJQdWJsaXNoZXIy ODM0MzI=