Packaging units are not covered in this catalogue; please enquire with your supplier. 76 DOOR REVEAL AND MINIMUM REVEAL Description Full overlay/door overlay Half door overlay Inset door The reveal is the distance between two doors or between the door and the cabinet side. The minimum reveal (F) is the distance between two doors or between the door and the side wall. The gap allows the door to be opened without any collision. F 2 x F F Minimum reveal table Achievable reveal with inset door The required reveal width depends on the door thickness. For example: With a door thickness of 19 mm and a cup distance of 6 mm, a minimum reveal of 0.9 mm is required. Important Reveals were determined with a (door) edge radius of 1 mm. We recommend a trial fitting. Door thickness Cup distance 3 4 5 6 7 24 2.4 2.1 2.1 2.1 2.0 22 1.6 1.6 1.6 1.5 1.5 21 1.4 1.3 1.3 1.3 1.3 20 1.1 1.1 1.1 1.5 1.1 19 0.9 0.9 0.9 0.9 0.9 18 0.7 0.7 0.7 0.7 0.7 17 0.6 0.6 0.6 0.6 0.6 16 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) The table shows the reveal that can be achieved with an inset door depending on the cup distance and mounting plate height. For example: With a cup distance of 6 mm and a mounting plate height of 3 mm, there is a reveal of 1 mm. This is also referred to as a negative overlay. Door reveal Cup distance 3 4 5 6 7 0.0 0 2 3 0.5 3.5 1.0 0 2 3 1.5 3.5 2.0 2 3 3.0 2 3 4.0 3 Mounting plate height Description Example The minimum gap is the gap between the cabinet face and the door when the door is closed. The gap allows the door to be opened without any collision. The factory setting for the gap is 1.5 mm. The cup distance (TA) is the distance between the door edge and the edge of the cup hole. TA 1.5 mm With a door thickness of 17 mm and a cup distance of 6 mm, the minimum gap is 1.0 mm. Door thickness Cup distance 3 4 5 6 7 24 1.0 1.0 1.0 1.2 2.1 22 1.0 1.0 1.0 1.0 1.5 21 1.0 1.0 1.0 1.0 1.2 20 1.0 1.0 1.0 1.0 1.0 19 1.0 1.0 1.0 1.0 1.0 18 1.0 1.0 1.0 1.0 1.0 17 1.0 1.0 1.0 1.0 1.0 16 1.0 1.0 1.0 1.0 1.0 Minimum gap Tiomos Technical information
RkJQdWJsaXNoZXIy ODM0MzI=