All dimensions in millimetres. Subject to changes. 33 PLANNING DIMENSIONS All dimensions in millimetres Overlay 19 X + 47.5 28 X 4 16.5 7 2.5 11.5 36 19 69.5 22 0 5.5 6.6 19 1.5 19 1.5 6.5 2 16 40 65.5 18 16.5 0 Mounting plate height 0 Mounting plate height 8 Mounting plate height 12 Door overlay Cup distance 3 4 5 6 7 19.5 0 19.0 18.5 0 18.0 17.5 0 17.0 16.5 0 2 16.0 15.5 0 2 15.0 3 14.5 2 14.0 3 13.5 2 13.0 3 12.5 2 12.0 3 11.0 3 6 10.0 6 Mounting plate height X Cross mounting plates with mounting distance 37 Mounting plate height 0 2 3 6 X 30.5 28.5 27.5 24.5 Cross mounting plate position (X) X Linear mounting plates Mounting plate height 0 2 3 X 13.5 11.5 10.5 Linear mounting plate position (X) MINIMUM GAP Door thickness Cup distance 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 22.0 1.0 1.0 1.0 1.0 1.5 21.0 1.0 1.0 1.0 1.0 1.2 20.0 1.0 1.0 1.0 1.0 1.0 19.0 1.0 1.0 1.0 1.0 1.0 18.0 1.0 1.0 1.0 1.0 1.0 17.0 1.0 1.0 1.0 1.0 1.0 16.0 1.0 1.0 1.0 1.0 1.0 Minimum gap MINIMUM REVEAL Door thickness Cup distance 3 4 5 6 7 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.1 1.1 1.1 1.1 1.1 19.0 0.9 0.9 0.9 0.9 0.9 18.0 0.7 0.7 0.7 0.7 0.7 17.0 0.6 0.6 0.6 0.6 0.6 16.0 0.6 0.6 0.6 0.6 0.6 Minimum reveal (F) NOTES The minimum gap is the clearance required between the cabinet face and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. DRILLING PATTERNS 45/9.5 For screw fitting 9.5 45 35+0.1 Impresso combination drilling pattern 45 8 9.5 35+0.1 48 8 9 35+0.1 CUP DIMENSIONS 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) Hinge systems Tiomos 110/45A
RkJQdWJsaXNoZXIy ODM0MzI=