Hinge systems.Nexis Impresso 65.170° wide-angle hinge All dimensions in millimetres. Subject to changes. 105 PLANNING DIMENSIONS All dimensions in millimetres Full overlay K0 Inset K0 Mitred application K0 2 max. 26 3.5 55 70 4-8 F 11 71 71 19 4-8 F 6 18 12.5 71 71 19 120° 37 19 3 Mounting plate height 2 Inset application Mitred application Door overlay 0 Cup distance 4 5 6 7 8 21 0 20 0 19 0 2 18 0 2 3 17 0 2 3 4 16 2 3 4 15 2 3 4 14 3 4 13 4 Mounting plate height With cranking 0, cup distance 4 mm and mounting plate height 18, you can achieve an inset application. Use 120° opening angle reduction clip. With cranking 0, cup distance 3 mm and mounting plate height 18, you can achieve a mitred application. Use 120° opening angle reduction clip. ZERO PROTRUSION Zero protrusion for use with inset drawers. With cranking 0 and mounting plate height 0, the door is flush with the cabinet at 90°. MINIMUM GAP Door thickness Cup distance 4 5 6 8 16 0.7 0.7 0.7 0.7 18 0.7 0.7 0.7 0.7 19 0.7 0.7 0.7 0.7 20 0.7 0.7 0.7 0.7 22 0.7 0.7 0.7 0.7 23 0.7 0.7 0.7 0.7 24 0.7 0.7 0.7 0.7 25 0.7 0.7 0.7 0.7 26 0.7 0.7 0.7 0.7 Minimum gap MINIMUM REVEAL Door thickness Cup distance 4 5 6 7 8 16 0.0 0.0 0.0 0.0 0.0 18 0.0 0.0 0.0 0.0 0.0 19 0.0 0.0 0.0 0.0 0.0 20 0.0 0.0 0.0 0.0 0.0 22 0.0 0.0 0.0 0.0 0.0 23 0.0 0.0 0.0 0.0 0.0 24 0.7 0.7 0.7 1.8 2.0 25 6.5 6.0 5.5 4.8 4.0 26 9.5 8.5 7.5 6.5 5.5 Minimum reveal (F) NOTES The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Important: Reveals were determined with a (door) edge radius of 1 mm. Hinge dimensions and reveal calculation with factory setting. We recommend a trial fitting. DRILLING PATTERNS Combination drilling pattern 48/9 and 45/9.5 CUP DIMENSIONS Hinge systems Nexis Impresso 65
RkJQdWJsaXNoZXIy ODM0MzI=