97 All dimensions in millimetres. Subject to changes. Flap Systems CABINET MAKING ACCESSORIES FIXOGRASS 9200 TWIN BOLTS FOR SCREWING IN A ROW OF HOLES Description Material/surface Art. no. • Twin bolts for fitting in dia. 5 mm holes BOLH 14 - 22 BOLS Ø 5 Die-cast zinc/Zinc plated F148044841 F148044842 FIXOGRASS 9200 CORNER BOLT FOR FIXING WITH DOWEL DIA. 10 MM/M6 Description Material/surface Art. no. • Corner bolt for fixing with dowel dia. 10 mm/M6 Ø 10/12 BT Die-cast zinc/Zinc plated F148043024 • Dowel dia.10 mm/M6 Plastic/Plastic F145083050 LOADING WEIGHT NOTICE 1 500 1000 1500 0 2 3 4 5 6 N (10 N = 1 kp) 1 Dowel dia. 8/M5 (not glued) 2 Dowel dia. 8/M5 (glued) 3 Euro screw dia. 6 x 11 4 Dowel dia. 10/M6 (not glued) 5 Dowel dia. 10/M6 (glued) 6 Twin bolts The maximum load shown in the diagram is intended for reference and is based on the axial pull-out resistance (of the bolt on the cabinet side). The key factors are the material quality and bore diameter. In case of doubt, the pull-out resistance must be determined by means of a trial fitting. PLANNING INFORMATION All dimensions in millimetres Installation dimensions Ø 15 34.5 b a Ø 8 BS Ø 7 Ø 15 34.5 16 1 b a BS Board thickness 14 - 16 17 - 20 21 - 23 a 12.5 15.0 16.2 Installation drawing with corner bolt Installation drawing with countersunk bolt or twin bolt b 8.0 9.5 11.0 BOLH Bolt sleeve BOLS Bolt screw BS Base thickness BT Drilling depth kp Kilopond N Newton LEGEND
RkJQdWJsaXNoZXIy ODM0MzI=