47 All dimensions in millimetres. Subject to changes. Hinge systems DRILLING PATTERNS CUP DIMENSIONS For screw fitting 9.5 45 35+0.1 39 (40.5) 62 (64.5) ( ) Impresso min. 12.6 3 (8) 39 (40.5) MINIMUM GAP MINIMUM JOINT NOTICE Door thickness Cup distance Door thickness Cup distance The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. A trial fitting is recommended for door thicknesses from 24 mm. 3 4 5 6 7 3 4 5 6 7 24.0 1.0 1.0 1.0 1.2 2.1 24.0 2.4 2.1 2.1 2.1 2.0 22.0 1.0 1.0 1.0 1.0 1.5 22.0 1.6 1.6 1.6 1.5 1.5 21.0 1.0 1.0 1.0 1.0 1.2 21.0 1.4 1.3 1.3 1.3 1.3 20.0 1.0 1.0 1.0 1.0 1.0 20.0 1.1 1.1 1.1 1.1 1.1 19.0 1.0 1.0 1.0 1.0 1.0 19.0 0.9 0.9 0.9 0.9 0.9 18.0 1.0 1.0 1.0 1.0 1.0 18.0 0.7 0.7 0.7 0.7 0.7 17.0 1.0 1.0 1.0 1.0 1.0 17.0 0.6 0.6 0.6 0.6 0.6 16.0 1.0 1.0 1.0 1.0 1.0 16.0 0.6 0.6 0.6 0.6 0.6 Minimum gap Minimum joint (F) PLANNING INFORMATION All dimensions in millimetres Overlay 19 X + 47.5 28 X 4 16.5 7 2.5 11.5 36 19 69.5 22 0 5.5 6.6 19 1.5 19 1.5 6.5 2 16 40 65.5 18 16.5 0 Mounting plate height 0 Mounting plate height 8 Mounting plate height 12 Door overlay Cup distance X X 3 4 5 6 7 19.5 0 19.0 18.5 0 18.0 17.5 0 17.0 16.5 0 2 16.0 15.5 0 2 15.0 3 14.5 2 3.5 14.0 3 13.5 2 3.5 13.0 3 12.5 2 3.5 Cross mounting plates with mounting distance 37 Linear mounting plate 12.0 3 Mounting plate height Mounting plate height 11.0 3 6 0 2 3 3.5 6 0 2 3 3.5 10.0 6 X 30.5 28.5 27.5 27.0 24.5 X 13.5 11.5 10.5 10.0 Mounting plate height Cross mounting plate position (X) Linear mounting plate position (X) TIOMOS
RkJQdWJsaXNoZXIy ODM0MzI=