107 All dimensions in millimetres. Subject to changes. Hinge systems DRILLING PATTERNS CUP DIMENSIONS For screw fitting For press fitting ZERO PROTRUSION MINIMUM GAP MINIMUM JOINT NOTICE Door thickness Cup distance Door thickness Cup distance The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Important: Reveals were determined with a (door) edge radius of 1 mm. Hinge dimensions and reveal calculation with factory setting. We recommend a trial fitting. 3 4 5 6 8 10 3 4 5 6 7 8 16 0.0 0.0 0.0 0.0 0.0 0.0 16 0.0 0.0 0.0 0.0 0.0 0.0 18 0.0 0.0 0.0 0.0 0.0 0.0 18 0.0 0.0 0.0 0.0 0.0 0.0 19 0.0 0.0 0.0 0.0 0.0 0.0 19 0.0 0.0 0.0 0.0 0.0 0.0 20 0.0 0.0 0.0 0.0 0.0 0.0 20 0.0 0.0 0.0 0.0 0.0 0.0 22 0.0 0.0 0.0 0.0 0.0 0.0 22 0.0 0.0 0.0 0.0 0.0 0.0 23 0.0 0.0 0.0 0.0 0.0 0.0 23 0.0 0.0 0.0 0.0 0.0 0.0 24 0.0 0.0 0.0 0.0 0.0 0.0 24 0.0 0.0 0.0 0.5 1.8 2.0 Zero protrusion for use with inset drawers. With cranking 0 and mounting plate height 0, the door is flush with the cabinet at 90°. 25 0.0 0.0 0.0 0.0 0.0 0.0 25 6.5 6.5 6.0 5.5 4.8 4.0 26 0.0 0.0 0.0 0.0 0.0 0.0 26 10.5 9.5 8.5 7.5 6.5 5.5 Minimum gap Minimum joint (F) PLANNING INFORMATION All dimensions in millimetres Full overlay K0 Half overlay K8 Inset K0 Mitred application K0 2 max. 26 3.5 55 70 3-8 F 11 max. 26 3-8 2xF 10 4.5 3 F 63 70 18 12.5 71 71 19 3-8 F 6 71 71 19 120° 37 19 3 Mounting plate height 2 Mounting plate height 2 Inset application Mitred application Door overlay 0 Cup distance Door overlay 8 Cup distance With cranking 0, cup distance 3 mm and mounting plate height 18, you can achieve an inset application. Use 120° opening angle reduction clip. With cranking 0, cup distance 3 mm and mounting plate height 18, you can achieve a mitred application. Use 120° opening angle reduction clip. 3 4 5 6 7 8 3 4 5 6 7 8 21 0 13 0 20 0 12 0 19 0 2 11 0 2 18 0 2 3 10 0 2 3 17 0 2 3 4 9 0 2 3 4 16 0 2 3 4 8 0 2 3 4 15 2 3 4 7 2 3 4 14 2 3 4 6 2 3 4 13 3 4 5 3 4 12 4 Mounting plate height Mounting plate height NEXIS CLICK-ON
RkJQdWJsaXNoZXIy ODM0MzI=