531 All dimensions in millimetres. Subject to changes. Hinge Systems 1 2 3 4 ADJUSTMENTS Description Side adjustment +1/-3 mm Depth adjustment +3/-1 mm Height adjustment +/- 2 mm The possibility of height adjustment depends on the type of mounting plate. All adjustments can be carried out independently of each other. NEXIS SLIDE-ON A Door overlay F Reveal MS Minimum gap SA Number of hinges TA Cup distance TES Door protrusion LEGEND DOOR PROTRUSION/DOOR OVERLAY Door protrusion Door overlay The door protrusion (TES) is obtained when the door is open and varies depending on the hinge type and application. It is specified on the individual catalogue page and relates to the mounting plate specified in the factory setting in each case. It changes when the mounting plate height is changed and the side adjustment is used. TES The door overlay (A) is the part of the side wall or frame that is covered by the door. For example: For a hinge with cranking 8, mounting plate height 0 and a cup distance of 5 mm, the door overlay is 10 mm. Door overlay 8 Cup distance 3 4 5 6 11 0 10 0 9 0 8 0 2 3 7 2 3 4 6 2 3 4 5 3 4 4 4 Mounting plate height MINIMUM GAP/CUP DISTANCE Description Example The minimum gap (MS) is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. The cup distance (TA) is the distance between the door edge and the edge of the cup hole. TA A MS With a door thickness of 26 mm and a cup distance of 6 mm, the minimum gap is 0.7 mm. Door thickness Cup distance 3 4 5 6 16 0.5 0.5 0.5 0.5 18 0.5 0.5 0.5 0.5 19 0.5 0.5 0.5 0.5 20 0.0 0.0 0.0 0.5 22 0.5 0.5 0.5 0.5 24 0.5 0.5 0.5 0.5 26 0.5 0.5 0.5 0.7 28 0.5 0.5 0.5 0.9 30 0.5 0.5 1.1 1.1 Minimum gap
RkJQdWJsaXNoZXIy ODM0MzI=