530 Page references NEXIS SLIDE-ON Technical information Nexis Slide-on 521 Nexis Slide-on mounting plates 528 Assembly technology 575 Assembly aids 580 NUMBER OF HINGES PER DOOR Description The decisive factors are door height, door weight, material quality, cup and mounting plate fixing. The load and height values are for standard door widths of 600 mm. Hinges with cup dia. 26 mm were tested with door width 450 mm. In case of doubt, the number of hinges must be determined by means of a trial fitting. 4–5 kg 2 3 4 5 6–9 kg 10–15 kg 16–22 kg 600 mm 900 mm 1600 mm 2000 mm 2500 mm SA DOOR REVEAL/MINIMUM JOINT Description Full door overlay Half door overlay Inset door The reveal is the distance between two doors or between the door and the cabinet side. The minimum reveal (F) is the distance between two doors or between the door and the side wall. The gap allows the door to be opened without any collision. F 2 x F F Minimum reveal table Achievable reveal with inset door The required reveal width depends on the door thickness. For example: With a door thickness of 18 mm and a cup distance of 6 mm, a reveal of 0.2 mm is required. Important Reveals were determined with a (door) edge radius of 1 mm. Hinge dimensions and reveal calculation with factory setting. We recommend a trial fitting. Door thickness Cup distance The table shows the reveal that can be achieved with an inset door depending on the cup distance and mounting plate height. For example: With a cup distance of 4 mm and a mounting plate height of 4 mm, there is a reveal of 2 mm. Door reveal 15 Cup distance 3 4 5 6 3 4 5 6 16 0.1 0.1 0.1 0.1 0 2 4 18 0.2 0.2 0.2 0.2 1 2 4 19 0.3 0.3 0.3 0.3 2 4 20 0.4 0.4 0.4 0.4 22 0.7 0.7 0.7 0.7 24 1.0 1.0 1.0 1.0 26 1.4 1.4 1.4 1.4 28 1.9 1.9 1.9 1.9 30 3.8 2.9 2.6 2.5 Minimum joint (F) Mounting plate height
RkJQdWJsaXNoZXIy ODM0MzI=