519 All dimensions in millimetres. Subject to changes. Hinge systems 1 2 3 4 overlay K3 half overlay K9.5 inset1 K9.5 3-8 F 10 56 0.8 max. 66 80 3-10 3.5 F 5.7 62.5 80 max. 72.5 2x F 3-8 F 6 15.7 81.5 72.5 max. 82.5 Mounting plate height 2 Mounting plate height 2 Mounting plate height 12 1Set the mounting plate back by the door thickness +1.5 mm Door overlay 3 Cup distance Door overlay 9.5 Cup distance Door reveal 9.5 Cup distance 3 4 5 6 7 8 3 4 5 6 7 8 3 4 5 20.0 0 13.5 0 0.5 19.0 0 12.5 0 2 1.5 12 18.0 0 2 11.5 0 2 2.5 12 17.0 0 2 3 10.5 0 2 3 3.5 12 14 16.0 0 2 3 9.5 0 2 3 4.5 14 15.0 0 2 3 8.5 0 2 3 14.0 2 3 7.5 2 3 13.0 2 3 6.5 2 3 12.0 3 5.5 3 Mounting plate height Mounting plate height Mounting plate height PLANNING INFORMATION All dimensions in millimetres TIOMOS MINIMUM GAP MINIMUM REVEAL NOTICE Door thickness Cup distance Door thickness Cup distance The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. For door thicknesses up to 25 mm, no reveals are necessary. For door thicknesses from 26 mm, we recommend a trial fitting. 3 4 5 6 7 8 3 4 5 6 7 8 28.0 0.0 0.0 0.0 28.0 1.01 1.01 1.51 26.0 0.0 0.0 0.0 0.0 0.0 26.0 0.52 0.52 0.52 0.51 0.51 25.0 0.0 0.0 0.0 0.0 0.0 0.0 25.0 0.02 0.02 0.02 0.02 0.02 0.01 24.0 0.0 0.0 0.0 0.0 0.0 0.0 24.0 0.0 0.0 0.0 0.02 0.02 0.02 22.0 0.0 0.0 0.0 0.0 0.0 0.0 22.0 0.0 0.0 0.0 0.0 0.0 0.0 21.0 0.0 0.0 0.0 0.0 0.0 0.0 21.0 0.0 0.0 0.0 0.0 0.0 0.0 20.0 0.0 0.0 0.0 0.0 0.0 0.0 20.0 0.0 0.0 0.0 0.0 0.0 0.0 19.0 0.0 0.0 0.0 0.0 0.0 0.0 19.0 0.0 0.0 0.0 0.0 0.0 0.0 18.0 0.0 0.0 0.0 0.0 0.0 0.0 18.0 0.0 0.0 0.0 0.0 0.0 0.0 16.0 0.0 0.0 0.0 0.0 0.0 0.0 16.0 0.0 0.0 0.0 0.0 0.0 0.0 Minimum gap Minimum reveal (F) 1 Only possible with 92° angle reduction clip 2 Only possible with 110° angle reduction clip DRILLING PATTERNS CUP DIMENSIONS For screw fitting For press fitting 9.5 45 35+0.1 45 8 9.5 35+0.1 39 62 min. 11.5 3 39
RkJQdWJsaXNoZXIy ODM0MzI=