507 All dimensions in millimetres. Subject to changes. Hinge Systems 1 2 3 4 NUMBER OF HINGES NOTICE 4–6 kg 2 3 4 5 7–12 kg 13–17 kg 18–22 kg 500 mm 900 mm 1600 mm 2200 mm 2450 mm SA PLANNING INFORMATION All dimensions in millimetres Full overlay Half overlay Inset min. 2 55 73-75 X b = 3-8 max. 21 z A 55 73-75 min. 2 X b = 3-8 A z min. 2 b = 3-8 X + b + 2.5 55 z Mounting plate height 2 Mounting plate height 2 Mounting plate height 2 CROSS MOUNTING PLATE LINEAR MOUNTING PLATE STAINLESS STEEL ADAPTER Hole spacing Mounting plate height Hole spacing Mounting plate height Mounting plate height 0 2 4 0 2 4 0 2 4 28 37 37 37 13.5 22.5 22.5 22.5 z A+7 A+9 A+11 37 46 46 46 22 31 31 31 A max. 14 max. 12 max. 10 X Mounting plate position X Mounting plate position z = adhesive position NEXIS CLICK-ON The door overlay (A) on the cabinet side depends on the gluing distance of the hinge seat (z) and the mounting plate height. The maximum overlay is 16 mm when using a mounting plate height of 0 and using the adjustment facility. An inset application is achieved by altering the fixing distance of the mounting plate (X) and reducing the gluing distance. ⓘ Caution: For mirror or glass doors, all reveals must be at least 2 mm (otherwise there is a risk of breakage). The inside edge of the door must not touch the cabinet when opened. ⓘ Installation advice: Please contact your glass or door supplier regarding the selection and application of the adhesive for fixing the hinge seat to mirror or glass doors. ⓘ Liability claims: Please note that GRASS does not assume any liability for the adhesive and the gluing technique used, nor for any resulting claims.
RkJQdWJsaXNoZXIy ODM0MzI=