471 All dimensions in millimetres. Subject to changes. Hinge Systems 1 2 3 4 F Reveal LEGEND ADJUSTMENTS TO THE DOOR (APPLIES TO ALL TIOMOS HINGES) Description Side adjustment with limit stop +/- 2 mm Convenient depth adjustment via worm screw +3/-2 mm Height adjustment via mounting plate +/- 2 mm The possibility of height adjustment depends on the type of mounting plate. All adjustments can be carried out independently of each other. When using a mounting plate with height -2, side adjustment is limited. DOOR REVEAL/MINIMUM JOINT Description Full overlay/door overlay Half door overlay Inset door The reveal is the distance between two doors or between the door and the cabinet side. The minimum reveal (F) is the distance between two doors or between the door and the side wall. The gap allows the door to be opened without any collision. F 2 x F F Minimum reveal table Achievable reveal with inset door The required reveal width depends on the door thickness. For example: With a door thickness of 19 mm and a cup distance of 6 mm, a minimum reveal of 0.9 mm is required. Important Reveals were determined with a (door) edge radius of 1 mm. We recommend a trial fitting. Door thickness Cup distance The table shows the reveal that can be achieved with an inset door depending on the cup distance and mounting plate height. For example: With a cup distance of 6 mm and a mounting plate height of 3 mm, there is a reveal of 1 mm. This is also referred to as a negative overlay. Door reveal Cup distance 3 4 5 6 7 3 4 5 6 7 24 2.4 2.1 2.1 2.1 2.0 0.0 0 2 3 22 1.6 1.6 1.6 1.5 1.5 0.5 3.5 21 1.4 1.3 1.3 1.3 1.3 1.0 0 2 3 20 1.1 1.1 1.1 1.5 1.1 1.5 3.5 19 0.9 0.9 0.9 0.9 0.9 2.0 2 3 18 0.7 0.7 0.7 0.7 0.7 3.0 2 3 17 0.6 0.6 0.6 0.6 0.6 4.0 3 16 0.6 0.6 0.6 0.6 0.6 Minimum joint (F) Mounting plate height TIOMOS
RkJQdWJsaXNoZXIy ODM0MzI=