449 All dimensions in millimetres. Subject to changes. Hinge Systems 1 2 3 4 PLANNING INFORMATION All dimensions in millimetres Overlay Half overlay Inset X 93.5 min. 1.5 TS TES A Z F 58 X TS A 2xF Z F 58 TS X+TS+1.5 93.5+TS+1.5 Z F 58 Mounting plate height 0 Mounting plate height 0 Mounting plate height 0 MINIMUM GAP/MINIMUM JOINT Values for mounting plate height 0 Screwing distance (Z) 38 39 47 49 51 53 55 56 58 60 61 63 64 66 Door protrusion (TES) 0 0 0 0 0 0 0 0.5 1.5 3 3.4 0 0 0 Door overlay (A) -3 -2 6 8 10 12 14 15 17 19 20 221 231 251 Min. joint width (F)/ Gap width (S) F S F S F S F S F S F S F S F S F S F S F S F S F S F S Door thickness 6-10 (TS) 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 1.5 2 2.5 2 3 3 3 1 Door overlay A = 22-25 only with angle reduction. CROSS MOUNTING PLATE LINEAR MOUNTING PLATE SCREW-ON POSITION X X Z 48 10 A 52 32 Hole spacing Mounting plate height 0 Mounting plate height 0 Mounting plate height 0 28 37 X 29 Z A+41 37 46 A Max. 25 Mounting plate position (X) Mounting plate position (X) Screwing distance (Z) TIOMOS M SERIES NUMBER OF HINGES NOTICE 4–6 kg 2 3 4 5 7–12 kg 13–17 kg 18–22 kg 500 mm 900 mm 1600 mm 2200 mm 2450 mm SA An inset application is achieved through the mounting plate position (X) and a reduced housing screwing distance (Z). LInstallation advice: Countersunk screw M4 x 8 mm: 1. Drill hole with dia. 3.3 mm 2. Cut thread to dia. 4 mm 3. Fit the hinge and fix with the screws LInstallation advice: Countersunk screw M4 x 8 mm with sleeve M4 x 5.5 mm: 1. Drill hole with dia. 5 mm 2. Drilling depth: 6 mm 3. Slightly countersink the edge of the hole 4. Insert the sleeve 5. Knock in the sleeve using a hammer 6. Fit the hinge and fix with the screws LInstallation advice: Euro cheese head dia. 6.3 x 10.5 mm: 1. Drill hole with dia. 5 mm 2. Fit the hinge and fix with the screws LInstallation advice: The pull-out resistance can vary based on the type and thickness of the door material, despite using the same fixing method. Please contact your door material supplier regarding the selection and installation of the door material. LLiability claims: Please note that GRASS does not assume any liability for damages arising from the use of unsuitable fastening materials or fixing methods.
RkJQdWJsaXNoZXIy ODM0MzI=