399 All dimensions in millimetres. Subject to changes. Hinge Systems 1 2 3 4 DRILLING PATTERNS CUP DIMENSIONS For screw fitting 9.5 45 35+0.1 39 (40.5) 62 (64.5) ( ) Impresso min. 10 3 (8) 39 (40.5) Overlay K3 Half overlay K9.5 84.5 3-8 F 10 67 0.4 84.5 3-8 2x F 6.1 73.5 3.5 F Mounting plate height 2 Mounting plate height 2 Door overlay 3 Cup distance Door overlay 9.5 Cup distance 3 4 5 6 7 8 3 4 5 6 7 8 22.0 -2 14.5 -2 21.0 -2 13.5 -2 0 20.0 -2 0 12.5 -2 0 19.0 -2 0 11.5 -2 0 2 18.0 -2 0 2 10.5 -2 0 2 3 17.0 -2 0 2 3 10.0 16.5 9.5 0 2 3 16.0 0 2 3 9.0 15.5 8.5 0 2 3 15.0 0 2 3 8.0 14.5 7.5 2 3 14.0 2 3 7.0 13.5 6.5 2 3 13.0 2 3 6.0 12.5 5.5 3 12.0 3 Mounting plate height Mounting plate height PLANNING INFORMATION All dimensions in millimetres MINIMUM GAP MINIMUM JOINT NOTICE Door thickness Cup distance Door thickness Cup distance The minimum gap is the clearance required between the front edge of the cabinet and the closed door so that the door can be opened without hindrance. Minimum reveal for doors with chamfered edges (R = 1 mm) with factory setting. For door thicknesses from 28 mm, no reveals are necessary. For door thicknesses from 29 mm, we recommend a trial fitting. 3 4 5 6 7 8 3 4 5 6 7 8 32.0 1.0 1.0 32.0 0.21 0.21 31.0 1.0 1.0 1.0 31.0 0.21 0.21 0.21 0.21 30.0 1.0 1.0 1.0 30.0 0.21 0.21 0.21 0.21 0.21 29.0 1.0 1.0 1.0 1.0 1.0 1.0 29.0 0.21 0.21 0.21 0.21 0.21 0.21 28.0 1.0 1.0 1.0 1.0 1.0 1.0 28.0 0.0 0.0 0.0 0.0 0.0 0.0 26.0 1.0 1.0 1.0 1.0 1.0 1.0 26.0 0.0 0.0 0.0 0.0 0.0 0.0 25.0 1.0 1.0 1.0 1.0 1.0 1.0 25.0 0.0 0.0 0.0 0.0 0.0 0.0 24.0 1.0 1.0 1.0 1.0 1.0 1.0 24.0 0.0 0.0 0.0 0.0 0.0 0.0 22.0 1.0 1.0 1.0 1.0 1.0 1.0 22.0 0.0 0.0 0.0 0.0 0.0 0.0 21.0 1.0 1.0 1.0 1.0 1.0 1.0 21.0 0.0 0.0 0.0 0.0 0.0 0.0 20.0 1.0 1.0 1.0 1.0 1.0 1.0 20.0 0.0 0.0 0.0 0.0 0.0 0.0 18.0 1.0 1.0 1.0 1.0 1.0 1.0 18.0 0.0 0.0 0.0 0.0 0.0 0.0 16.0 1.0 1.0 1.0 1.0 1.0 1.0 16.0 0.0 0.0 0.0 0.0 0.0 0.0 Minimum gap Minimum joint (F) 1 Only possible with 120° angle reduction clip TIOMOS
RkJQdWJsaXNoZXIy ODM0MzI=